Infos in Yamaha Ersatzteilnummern

Hier geht es um AiA-taugliche Motoren, Maschinen, Fahrzeuge. Wyrdiges Zeug kwasi :D

Infos in Yamaha Ersatzteilnummern

Beitragvon motorang » Di 16 Mär, 2021 09:23

Zur Auffrischung!

Yamaha_PN_Decipher.pdf
(3.94 MiB) 185-mal heruntergeladen


Info von hier:

About Yamaha part numbers

Did you ever wonder what the different parts of a Yamaha part number stood for? There actually is a method to their madness. Here are the details - Unplugged!

Part Number in the format XXX-XXXXX-XX-XX

XXX-XXXXX-XX-XX
The first three digits are the Model Code (every model in the Yamaha Product Line has a unique model number) all parts are given a Model Code of the first model they were used on.

XXX-XXXXX-XX-XX
The middle five digits are the Basic Code number and indicates the actual part, i.e. 11631 = piston; 11311 = cylinder, etc.

"W" substituted in the first position of this five-digit group (000-W0000-00-00) indicates a factory assembled kit which differs in content from the original assembly used in production (i.e. 2M0-W0046-00-00 – Rear Break Pad assembly).

XXX-XXXXX-XX-XX
The next two digits are the Design Code and Design Change digits (so 01 means the part has had one design change). This part may or may not appear different, but it will be interchangeable with the original part.

XXX-XXXXX-XX-XX
The last two digits are the Color or Finish Code.

For a Part Number in the format XXXXX-XXXXX-XX

These are Hardware (fasteners). they all start with a '9' and end in '00'. - 9XXXX-XXXXX-00

9XXXX-XXXXX-00
The second and third digits tells us what type of fastener:

0 - 'various'
1 - bolts, cotter pins
2 - screws, nuts
3 - oil seals, O-rings, bearings
4 - spark plugs
5 - bolts, nuts
6 - ISO bolts
7 - ISO screws and nuts

9XXXX-XXXXX-00
The fourth and fifth digits tell us what material/surface finish (i.e. chromed).

9XXXX-XXXXX-00
Digits six and seven give the diameter (inner or outer) e.g. 08 would be an M8 size.

9XXXX-XXXXX-00
Digits eight, nine and ten are the length (except for '901' bolts for some reason)
There are also standard fastener types...e.g.
90105-XXXXX are Washer based bolts
90116-XXXXX are Studs
90401-XXXXX are Union bolts

99999-XXXXX means that a part has been superseded by a kit.


Gryße!
Andreas, der motorang
-------------------
Gerade als die Raupe dachte, die Welt würde untergehen, verwandelte sie sich in einen Schmetterling.
Benutzeravatar
motorang
Site Admin
 
Beiträge: 22946
Registriert: Do 09 Jun, 2005 08:49
Wohnort: Graz

Zurück zu Alteisentreiberisches

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder